How To Test Car Battery With Multimeter (Complete Guide)

A multimeter is an electronic device used to measure electric current, voltage, and resistance. In this article, we will show you how to use a multimeter to test a car battery.

Follow the line of the Guide.

Let’s Dive into the Topic.

How To Test Car Battery With Multimeter

Testing a car battery with a multimeter is a quick and easy way to determine if the battery is functioning properly. By following a few simple steps, you can use a multimeter to measure the battery’s voltage and check its condition.

First, connect the black lead of the multimeter to the negative terminal of the battery. Next, connect the red lead of the multimeter to the positive terminal of the battery.

Finally, set the multimeter to “DC volts” and read the voltage displayed on the screen. If the voltage reading is below 12 volts, then your battery needs to be replaced.

Checking the voltage of the battery

Checking the voltage of the battery

Batteries are an important part of our everyday lives. We use them to power our cell phones, laptops, and other electronic devices. It is important to check the voltage of a battery before using it to ensure that it is not too low or too high. If the voltage is too low, the battery may not be able to power the device. If the voltage is too high, the battery may explode.

Checking the specific gravity of the battery

If you are a car owner, it is important to know how to check the specific gravity of your battery. This will help you to determine whether or not your battery is working properly and needs to be replaced.

The specific gravity of a battery can be checked with a hydrometer, which is a device that measures the density of liquids. To check the specific gravity of your battery, follow these steps:

  1. Remove the caps from the top of each battery cell.
  2. Insert the hydrometer into one of the cells and give it a gentle spin.
  3. Wait for about 10 seconds and then read the hydrometer.
  4. Write down the reading for each cell.
  5. Compare the readings to see if they are within the normal range.
  6. If they are not, then you may need to replace your battery.

Checking for corrosion on the battery terminals

When it comes to car batteries, one of the most important things you can do to extend its life is to keep an eye on the terminals. This means checking for corrosion, which can prevent the battery from making a good connection and lead to decreased performance or failure. Fortunately, checking for corrosion is a pretty easy process.

Checking the state of charge of the battery

Batteries come in all shapes and sizes, and each has its own particular way of indicating how much charge remains. While some batteries have an indicator on the outside, others have a tiny light that glows when the battery is charging.

Knowing how to check the state of charge on your battery can help you save time and money. As a general rule, most batteries should have a charge state of at least 80%. The 12V battery in your vehicle should be able to jump-start another car if necessary. If the battery is completely dead, it’s unlikely that any amount of charging will be effective.

How do I determine if my battery is leaking?

The most common reason for a battery to leak is corrosion. If you are getting warning signals that your battery is going bad, it could be leaking. However, the level of leakage may not be enough to cause problems with your vehicle.


In conclusion, using a multimeter to test a car battery is a quick and easy way to check its health. If the battery is in good condition, the multimeter will show a voltage reading between 12.6 and 12.8 volts. If the battery is not in good condition, the multimeter will show a lower voltage reading.

By following these simple steps, you can test your car battery and determine if it needs to be replaced.

Leave a Comment